With the increasing importance of the Internet, multiple computers in a given location becomes the norm and not the exception. With two or more computers, the cost of Internet access in all the computers increases. This cost can be reduced by creating a network and allow both teams to share the same Internet connection. This option also allows file sharing and other networked devices. The Internet can be shared on two computers in different ways.
Step 1
Turn off and unplug the power supply.
Step 2
Make sure that the network of machines to each other, which means that sharing files and peripherals. hardware and / or software is required to form a network of computers together to make shared Internet access. Today the market is flooded with devices and applications that help to deliver one or both tasks.
Both teams must have an interface card (NIC) for the network. The NIC is also known as Ethernet card, network card or network card. Most new computers today have network cards installed in the factory. All you have to do is to connect to a network computer with a CAT5 Ethernet cable. In this case you must install an adapter, do not forget to install the necessary drivers, too.
Step 3
Test the network connection cables and start the computer. To initiate and investigate the presence of an environment of networked PCs.
Step 4
Identify an appropriate method of sharing the same Internet connection between two computers after creating the network between them. There are three ways to do this, and I called for the creation of an attorney. This method requires you to connect directly to a PC for the Internet connection so that the computer acts as a proxy server. If a standard modem is used as a form of Internet access, your computer must be connected directly to two LAN cards, so you can connect a modem and the other for interconnection with the second PC. A USB modem, however, requires a network card of the proxy. One major disadvantage of creating a proxy is that the computer directly connected to the Internet should always be to enable the second PC to use the Internet.
Step 5
The second option is to use a router with a LAN, a router allows network connection and data transmission. It also functions as a switch and performs other tasks, how to route data packets, determine the best route between the hosts, the secure transfer of data and allow sharing peripherals and Internet connections. The router LAN and WAN ports, the cables of the host country and that the cables are connected to the Internet, respectively. Connect the router to the modem. I need a router LAN port using a hub / switch, so both computers can share your Internet connection. Connect the LAN port on the router to a hub / switch, which in turn must be connected to both teams.
Step 6
The third option is the use of Multi-Port Router. multi-port routers have multiple ports to connect multiple hosts. This router, in combination with a hub / switch and has the ability to host over the number of LAN ports that have. Insert the cable Internet in the WAN port on the router. Connect two computers to the router’s LAN ports.
Step 7
Configure network settings for each computer, a relatively simple process that most operating systems are supported with easy to use wizards that take users through this process. New computers are configured for the network, thus avoiding the need for extensive configuration.
Related posts: